Category Archives

2 Articles

How to Choose the Best Wireless Earbuds Under your Budget

by chris 0 Comments

If you’re just like me, you could check Amazon for cheaper Apple earbud alternatives. Many low-cost earphones have higher grades for iPhone, Android mobile, and so on, but are they good?. Here I wrote a detailed guide on how to choose the best wireless earbuds under your budget and listed some of the best earbuds in the market.

Accessible to audiophiles

You need a set of headphones supporting AptX and AAC codecs to deliver the best sound output. If they are not compliant with the native mobile codec on some phones, you can find the default headsets in SBC. SBC does not look awful with that said, and most of the users are not likely to notice something.

Since every manufacturer ships on its own codec service to the AAC / AptX support, it will cost more to the manufacturers to test the buds in terms of sound performance. The best-sounding pairs that we have seen so far lack the support for AAC or AptX.

Is Sound cancelation beneficial?

If you really think about sound cancellation, we have some bad news: the perfect alternative will be Apple’s AirPods. In the genuine wireless environment, we looked at other ANC alternatives, and the more expensive pairs than the current ones can not be comparable to Apple’s offerings.

Both wired & wireless bluetooth in-ear Headphones must have an active noise cancelation feature to deliver the best sound experience. So we suggest you increase the budget at this stage if this attribute prevails.

Here, Check out the new Cost-effective wireless earbuds

Best Wireless Earbuds

EarFun Free

The most appealing features of the EarFun Free headphones are Bluetooth 5.0, USB, and wireless charging, as well as fully waterproof headphones (IPX7). Evaluating new and cost-effective wireless headphones is the sound of the elite? Yeah, it sounds pretty good, but the headphones aren’t just the speaker noise.

We have no sound clearness like genuine high-end wireless headphones costing $150 a couple or more; but, we do have good bass and ample audio clarity for you to believe that you get what you are paying for and more. The headphones can be predicted with adequate energy. The battery has a reasonable capacity of six hours, and four charges are given on the go, to a $45 class.

1More True Wireless Smart

After Apple’s AirPods started to conquer the market in 2016 we’ve tried several pricey and bulky wireless headsets from top brands, the best couple we’ve tested from is from a business you don’t even understand: 1More.

The wireless headphones of the second generation of the brand small audio have a 6.5 hour battery life, which is excellent for the AirPod, the Bluetooth AptX sound codec, and a set of comfortable headphones that guarantee a perfect fit.

Soft silicone earbuds help them snuggle in the little ears and make them an ideal pair for people who don’t seem to fit well. Moreover, they are a little more “stylish” than white AirPods in four colors (pink, green, gold, and black).

Anker Soundcore Liberty Air 2

Airpod and other truly branded wireless headphones cost 160 dollars a pair. The two headphones of Anker Soundcore Liberty Air have an appealing style and a good sound quality at $100 to provide a nice listening experience. This second-generation, available in black or white, offers USB-C charge, enhanced battery life (up to seven horsepower), and outstanding call efficiency.

The device provides a lot less than AirPods Pro, including a lightweight loading instance that has an excellent matte finish, with the exception of active sound canceled. The sound insulation of the earphones provides a wide range of room noise reduction systems and a range of elite earphones for sound calls, which is very close to the level of efficiency of the AirPods Pro.

Grado SR80e

Open Back SR80e Grade does not protect the snap mechanical keyboard of your colleagues, but it will provide you with the largest, most open-sound stage for less than $100. The helmet has a simple and established style handcrafted in Brooklyn.

Grado invested where it is: outstanding quality guts, rather than investing in appearances. Specialized animated drivers inside the SR80e play with our favorite music with energetic and realistic consistency, immersing you in the heart of your songs. None of the bass drums of John Bonham in the “Since I’ve Been Loving You” you’ve ever heard, You can’t hear it anymore on the SR80e.

Anker Soundcore Life P2

The Soundcore Life P2 headphones are a better value option for the two Anker Soundcore Freity Airs with comparable attributes. The buds cost in their boxes horizontally rather than vertically, and both the situation and buds sound marginally better than Liberty Air2.

They are much less consistent with well-known tracks, and the bass is not as well established, so the sound in Liberty Air 2 buds triples. But they are moister and pardoning, which I appreciate and the original Freedom Air is more like.

How to Play Music through Mic

by chris 0 Comments

Is it possible to play music using the mic? Let’s discuss it in this article. For playing music through a microphone, we need the required devices like a microphone, a sound source, and a speaker for connecting it with a microphone. This might be the way available for playing music through a microphone. 

Do you think whether there is an application that allows play sound through your microphone! Still, there are no devices invented like that, which is against the physical laws. The microphone will just do the job of sound to electrical signal conversion. It cannot act as a speaker. The only thing we can do is connect the speaker with the microphone.

First of all, we have to understand the functionality of the microphone. Microphone usually plays a role in capturing the sounds from the environment and converts it to its respective electrical signal. Microphones are mainly used for recording voices, speech recognition in many apps that are functioning using the input as sound.

We will be discussing the most effective methods which are useful for playing sounds through the mic.

Through Computer Software:

For playing music sounds through Mic, We need input sound source or music, and then we need a Mic device which is connected to the personal computer. All here, we need to convert the mic signals to sound to the receiver end using some computer software.

Voicemeeter Software:

Voicemeeter is a software which is used for reproducing and triggering the sounds within your computer. You can search for similar software on the Internet, which is more comfortable for you. You also need soundboard software. Soundboard software triggers and reproduces the sound and gives a clear form of output. 

This soundboard software will be receiving the input from the microphone’s sound output and gives the output to the voicemeeter input. Some of the soundboard software are EXP SOUNDBOARD, JINGLE PALETTE, MIXERE, SOUNDBOARD, etc.. 

The steps are given below for voicemeeter & soundboard guidance.

  • Download & install the soundboard software.
  • Enable the inputs and outputs in soundboard software.
  • Download the software named voicemeeter, which is free software available on the internet. Voicemeeter software will be available as voicemeeter banana or voicemeeter potato or simply has voicemeeter.
  • Install voicemeeter banana.
  • After successful installation restart your computer
  • Open your voicemeeter banana application. You will be finding the nodes A1, A2, A3 on the top right.
  • Click A1 dropdown, select WDM listening device from the dropdown. You will be using some other versions such as KS, MME, etc.. Alternatives for the WDM listening devices.
  • Select hardware input(for e.g., your headset mic) in which medium the computer wants to hear the sound.
  • Select virtual input as voicemeeter VAIO.
  • Select your output as voicemeeter. For selecting the output, we need to configure from Windows sound settings(Windows menu–>sound playback option–>choose your output device as voicemeeter.
  • Now open the music mixing section and join the party as a Kaster.
  • New cast session will open. Select your device and select the input as computer audio.
  • Now the process will be started. You get the output from the voicemeeter software.

Using Virtual Microphone:

This method doesn’t require microphone input. It directly receives the input from the audio file then processes truly to the virtual microphone. Similar to the above method, we have to use soundboard, and in addition to that, we have to download virtual microphone software. For soundboard, download, and install – refer to the above method. It is much more similar to the above method. It won’t require headphone connection efforts.

There are many free software available for the virtual audio cable. Download the virtual audio cable software and then start the installation. You need soundboard software also for proper sound hearability. It will connect the audio file and virtual audio cable software. Properly configure all the inputs and outputs to the respective software.